The water lines were below the base I made. I took out one dinette bench and this took its place. The other bench had water heater so that stayed and tuned it into a shelf and counter. So water lines run from bedroom in back through bathroom, under fridge , under the stand and into other bench. So I was able to tap into hot and cold water lines.
My dad helped me with this project. I had never plumbed anything, other then switching out a faucet. We found the Shark Bate connectors at the hardware store and it made the job so easy! I had pex pipes to I got some more to build the water line into the washer. I should of added a shut off for hot and cold because of the back flow of hot into cold. I forgot to grab the extra shut offs not thinking it would be a big deal and then someone pointed out my error! I’ll be fixing that after Thanksgiving!
The outside lines took a bit to figure out but I used a rubber tube to step down the built in hose to the port I got.
To my surprise there were wires running below my hole. But I was on the look out for them so I was able to hold them out of the way as we made the outside hole bigger.
Cutting through the outside wall was nerve racking!
The drain port is a standard one used in pop up campers that a garden hose can hook to. I’ll drain to a 5 gallon bucket if boondocking or run it in to sewer hose when hooked up. This way I avoid taking up my gray tank space and trying to plum that would of been a bit harder.
You can find the washer here. The spin basket does get most of the water out but I have thought about the increased humidity it can cause. I’ll be hanging the clothes in the bathroom and I have a small dehumidifier I’ll run. I can keep door closed and even open vent if I need. My other option is drying at campground laundry mat, especially if I get behind on laundry! If I’m just drying I can at least reduce my cost that way!
I had ordered a memory foam mattress which was a great price, under $150! It was very high quality and comfortable but it was just too big. It did not fold well going up and down and was constantly slipping down into the walk way.
I knew I was going to need to cut it down but I needed the sofa to be more comfortable for me to sleep on. I sure do miss my Sleep number bed!
The two problems I had was the front of the sofa slanted down so I was sleeping at an angel. The other one was that I could feel the springs through the mattress on that side because it has less material then the top part.
It was a family affair with my dad and mom both helping me with the project.
My dad helped me figure out how to fix the downward slop of the front side of the bed, reduce the gap in between the back and front when its laid flat, and making it a tab bit bigger but still be able to open and close.
I decided to mount the mattress after it was cut down onto plywood boards. I adjust the thickness of the boards for each 1/2 to make up for the decline I was experiencing. This also solved the issues of firmness and feeling the springs.
My mom helped me pick out the fabric and upholster the cushions. I decided to use two different colors to break up the look
There is storage underneath the sofa. The original wood door was not in good shape and I trashed it when I redid the floor. I had curtains up temporally until I decided what I wanted to do, but I really disliked them once I had the sofa done!
Since I had extra wood and fabric I recreated a similar flip down door.
I removed the old microwave convection oven because it hardly heated up water after 2mins and it was most likely giving me cancer 🤣🤣
I love vintage stuff but a 30 year old microwave…. nope!
I’m totally obsessed with my Cuisinart oven fryer and it fit perfectly in there with room on the side for the cutting board and induction cook plate. I still need to figure out what to put over the front so it’s secure when I’m driving, but that will come another day!
I ordered a electric kettle for less then $20! This way I can boil water quickly which is really the only thing I use a microwave for anyway. I truly don’t like to heat up leftovers in the microwave because it makes food taste like rubber! Plus with cooking smaller I am hoping for less leftovers!